GB series · All ceramic column crusher (disperser)
Two crushing discs are installed in the crushing cavity of the equipment. Each crushing disc is equipped with dozens of crushing columns, which are staggered with each other. The moving disc rotates at high speed under the drive of the motor. After entering the crushing cavity, it will be refined under the impact of the crushing column, and finally discharged from the gap at the lower part of the inner retaining ring.
1. Using the principle of "mechanical impact", the processing capacity is relatively high, the energy consumption is low, and it is not easy to accumulate materials, and the cleaning is convenient.
2. All impact wear parts are protected by engineering ceramics to meet the requirements of most high-tech materials to avoid metal impurity contamination (the key parts include crushing columns and retaining rings, etc.).
3. It can be used as the front pretreatment device of fine crushing equipment such as air flow crushing and mechanical crushing. It can also replace the stainless steel screen or cooperate with the vibrating screen to produce the final product; according to the material properties, it can be flexibly selected for single-machine intermittent use or combined with the subsequent collection for continuous use of material equipment.
技術參數表(Technical Data Sheet)：
Note: The specific configuration and processing effect need to be confirmed according to the material properties and processing requirements, and you can communicate with our engineers or come to do materials processing test first.